IUP Rear Panel


This is a mod that I thought the car needed ever since I first saw it. It seemd as if Ford forgot to do the panels on the rear seat when they did the IUP interior. This project was not too difficult but very time consuming. On the convertibles, the speaker is on the insde of the rear panels and there are hundreds of little holes to allow the sound to come through. After covering the panels with the red IUP material, each of the holes had to be drilled and colored. Finally, Silver tinsel welt was used to finish the job.



Instructions can be found here

Red IUP Fabric - $30
3M automotive spray adhesive - (left over from Trunk Mat project)
Door Welt (Left over from Door Welt Project)

Installed 2/17/2008